母带动态终混工具包 Metric Halo CGII v4.0.89 [WiN]

Team R2R | 05 November 2025 | 22.0 MB

核心功能：

• 世界级信号处理与工作流程。
• 用户可选择过采样倍数（最高 16 倍）。
• 密度处理（Density process）：通过凸显此前被掩盖的声音细节，有效提升感知到的作品电平，且不影响高电平峰值的动态表现。
• 响度处理（Loudness process）：在将峰值电平控制在满刻度以下的同时，以高透明度提升 RMS（均方根）电平。
• 真峰值限制器（True Peak Limiter）：以高透明度控制输出电平，确保真峰值电平始终不超过设定阈值。
• 直流阻断滤波器（DC-block filter）：消除任何残留的直流偏移（DC offset）。
• 抖动处理（Dither）：支持将输出信号抖动处理为 16 位至 24 位的精度。
• 辉光数码管（Nixie Tubes）：可显示用户所选的任意计量数值（包括综合 LUFS、短时 LUFS / 保持值、瞬时 LUFS / 保持值、真峰值或真峰值保持值）。
• 内置多款预设参数。
• 可调节用户界面（UI）尺寸。
• MH 预设管理器（MH Preset Manager）：支持跨平台调用预设参数。

• 无需安装 iLok 授权管理器（iLok License Manager）。
• 我们发布的版本加载速度更快，且比正版占用更少内存。

Chris Gehringer, Senior Mastering Engineer & Partner of Sterling Sound, was so taken with Metric Halo’s Sontec MES-432D9D that when Rick Carson approached him about doing a signature plug-in, he was was ready to go.

The result of the collaboration is CGII – a mastering dynamics finishing toolkit.

CGII is comprised of two uniquely complementary dynamics enhancement sections, a new True Peak Limiting stage, DC blocking and dither with LUFS/true peak metering via spiffy tube filament displays, all operating at up to 16x over-sampling (or none at all – depending on your tastes).

The design prioritizes musical integrity and ease of use, with the ability to add effective loudness, weight and definition without diminishing spatial depth and visceral impact the way traditional dynamics processors often do.

Use CGII to make your masters loud without losing the clarity, density and heft of the original mix. Even if you are working with a mix that is already loud, you can give it a little extra, without adding unpleasant distortion and without flattening out the material and sucking the life out of the low end. At the same time you can control the true-peak level of the program to ensure that there are no inter-sample overs.

We’ve also included dither, a DC-block filter and complete LUFS/True Peak metering so that you can place CGII at the end of your master chain as a one-stop shop for final processing.

While CGII’s original spec was to make things good & loud simultaneously, you will find that it is wonderful in a variety places in your mixing and processing chain.

Use the Loudness processor to excite harmonics. Use the Density processor to bring up the bloom and raise low-level clarity without affecting transients. Or simply put the incredibly transparent true-peak lookahead limit any place you need it.

Key Features:

World-class Signal Processing and Workflow.
User-Selectable Over-sampling (up to 16x).
Density process effectively increases perceived program level by pushing up previously masked detail without affecting higher level peak dynamics.
Loudness process gives you transparent increase in RMS level while maintaining peak levels below full-scale.
True Peak Limiter transparently controls output levels, ensuring that the true-peak level never exceeds the specified ceiling.
DC-block filter removes any residual DC offset.
Dither allows you to dither the output to 16 through 24-bits.
Nixie Tubes provide dB readout of any of the user-selectable meter values (LUFS Integrated, LUFS Short Term (or Hold), LUFS Momentary (or Hold), True Peak or TP Hold).
Many presets included.
Adjustable UI size.
MH Preset Manager – Provides cross-platform presets.

A witch said,

* iLok License Manager isn’t required to run.
* Our release loads faster and uses less memory than legit version.