所有分类
  • 所有分类
  • 宿主
  • 工具
  • 效果器
  • 教程
  • 采样器
  • 音源
  • 预设采样
  • 工程模板
  • 乐谱

智能音调曲线校正工具 Orra Audio Orra Tone Zone 1.1.31 WIN

File size: 4.7 MB

音调曲线校正器。在一个插件中分析、校正并塑造你的音调曲线。查看你的混音与专业目标之间的差距,并使用全参数均衡器和各频段饱和度进行精细调整。

  • 40频段频谱分析,显示平滑的音调曲线
  • 24条基于专业母带校准的流派目标曲线
  • 支持从任意音频文件中学习参考音轨
  • 基于快速傅里叶变换(FFT)的自动校正均衡器,具备电平感知处理能力
  • 6频段参数均衡器叠加,节点可拖动
  • 各频段模拟饱和度:电子管、压控放大器(VCA)、英式风格
  • A/B/C/D对比功能——四个槽位,可快速试听不同设置
  • 自动校正切换——禁用音调校正,同时保持一致的延迟,确保在任何音轨上都能实现可靠的插件延迟补偿(PDC)
  • 内部旁通(BYP)——干净的无缝交叉淡入淡出旁通,同时保持分析始终处于激活状态
  • 精细控制——按住Shift键滚动可精确调整Q值,按住Shift键拖动可精细调整频率/增益

让你的音调曲线保持在理想区域
这不仅仅是一个测量工具。
大多数音调分析工具仅止步于向你展示问题所在。而Tone Zone更进一步——它能在同一个窗口内完成分析、校正和手动精细调整,无需切换插件。

传统方法
打开一个测量插件查看音调曲线。发现问题。切换到另一个独立的均衡器进行校正。再翻回测量插件检查工作成果。重复此过程,直到看起来合适——或者直到你失去耐心。在一个插件中发现问题,却在另一个插件中修复。

Orra方法
将你的音调曲线与流派目标进行对比。转动校正旋钮,基于FFT的均衡器会自动将你的频谱向目标调整。然后,使用6频段参数均衡器进行精细调整,并为各频段添加饱和度——所有操作都在同一个窗口内完成,且实时更新。
无需切换插件,即可完成分析、校正和塑造。

主页
https://www.orraaudio.com/products/orra-tone-zone

 

 

Tonal Curve Corrector. Analyze, correct, and sculpt your tonal curve in one plugin. See where your mix sits against professional targets and fine-tune with a full parametric EQ and per-band saturation.

* 40-band spectral analysis with smooth tonal curve display
* 24 genre target curves calibrated from professional masters
* Reference track learning from any audio file
* FFT-based auto-corrective EQ with level-aware processing
* 6-band parametric EQ overlay with draggable nodes
* Per-band analog saturation: Tube, VCA, British
* A/B/C/D comparison — four slots for fast settings auditioning
* Auto Correction Toggle — Disable tonal correction while maintaining consistent latency for reliable PDC on any track
* Internal Bypass (BYP) — clean crossfade bypass with analysis always live
* Fine Control — Shift+scroll for precise Q, Shift+drag for fine frequency/gain

Keep your tonal curve in the zone
Not just a meter.
Most tonal analysis tools stop at showing you the problem. Tone Zone goes further — it analyzes, corrects, and lets you fine-tune by hand, all in the same window without switching plugins.

Traditional Approach
Open a metering plugin to see your tonal curve. Spot the issues. Switch to a separate EQ to make corrections. Flip back to the meter to check your work. Repeat until it looks right — or until you run out of patience.
See the problem in one plugin, fix it in another.

The Orra Way
See your tonal curve against a genre target. Turn up the correction knob and the FFT-based EQ nudges your spectrum toward the target automatically. Then fine-tune with a 6-band parametric EQ and add per-band saturation — all in the same window, all updating in real time.
Analyze, correct, and sculpt without ever switching plugins.

Homepage
资源下载
下载价格2 积分
VIP免费
此资源购买后7天内可下载。微信号:audio999555
0
分享海报
需要编曲混音教程、乐谱、工程文件,请联系微信:audio999555
没有账号?注册  忘记密码?