
Team BTCR | 25 October 2025 | WiN: 26 MB | MAC: 45 MB
APU 响度压缩器(APU Loudness Compressor)是一款压缩 / 扩展器,专为支持现代响度类型(响度单位满刻度 LUFS、真实峰值 True Peak)设计。这意味着其压缩曲线以 LUFS 测量值为基准生成,而非传统的均方根(RMS)或峰值(Peak)测量值。由于 LUFS 是更精准的响度测量单位,因此该压缩器能实现极具通透感的压缩效果,尤其适合母带处理与音频后期制作流程。
默认情况下,该压缩器不采用传统的 “阈值 + 比率” 控制方式,而是通过 “源范围”(source range)与 “目标范围”(target range)进行调节。若你更习惯传统操作,也可启用 “阈值 + 比率” 控制功能。在压缩器动态控制模块的右上角,设有一个下拉菜单,可在上述控制模式与其他模式(如扩展器模式、限制器模式等)之间切换。
启用 “学习模式”(learn mode)后,压缩器会自动调整 “源范围” 或 “目标范围”,以匹配输入的音频素材。这种模式是快速上手使用压缩器的理想选择,也可作为进一步精细调节的基础参数起点。
不妨试用一下,看看它是否符合你的工作流程需求。若你有任何疑问或反馈,可通过本网站的 “联系开发者”(Contact the Developer)入口随时沟通。
The APU Loudness Compressor is a compressor/expander designed to support modern loudness types (LUFS, True Peak). This means the compression curve is a function of LUFS measurements instead of RMS or Peak. Since LUFS is a more accurate measure of loudness, the result is very transparent compression, making it particularly well suited for mastering and post-production workflows.
By default, the compressor operates using a “source range” and “target range” in place of threshold + ratio controls. You can also enable the traditional threshold + ratio controls if you prefer. A drop-down menu located at the top-right of the compressor’s dynamics section allows switching between these modes of operation and others, such as expander, limiter, etc.
With “learn” mode enabled, the compressor will automatically adjust the source or target range to match the source material. This can be a great way to get started with the compressor and can be used as a starting point for further fine-tuning.
Check it out to see if it fits into your workflow. If you have any questions or feedback, don’t hesitate to reach out using the “Contact the Developer” beacon on this website.
资源下载此资源购买后7天内可下载。微信号:audio999555