所有分类
  • 所有分类
  • 宿主
  • 工具
  • 效果器
  • 教程
  • 采样器
  • 音源
  • 预设采样
  • 工程模板
  • 乐谱

Core Tone Captures 2Rock Continuum Pack V2

P2P | 24 November 2025 | 3.7 MB

ToneX Two Rock Traditional Clean 音箱模拟音色包 V2 – 专业级约翰·梅耶标志性清音质感全面再现

产品描述

这款专为 IK Multimedia ToneX​ 平台打造的 Two Rock Traditional Clean 音箱模拟音色包​ 现已迎来重大 V2 版本更新。更新运用品牌最新捕捉技术,对这款以音乐性压缩、弹性响应及清澈通透音色著称的经典音箱进行了完全重新采样。该音箱的音色特质常与约翰·梅耶​ 的现场及录音室作品紧密关联。此音色包不仅包含全新的 V2 采样,也保留了原有的 V1 版本采样集,便于用户对比或继续使用旧版音色。

核心亮点

  • 权威音色再现:精确捕捉 Two Rock Traditional Clean 音箱的动态响应触感灵敏度,涵盖从晶莹清音临界过载的多种纹理,并提供专为过载踏板优化的采样剖面。
  • 多样箱体配置:45 个 DI 采样均配有对应的 箱头+箱体组合版本,采用的箱体组合多样,包括 Two Rock 2×12(搭配 G12-65 单元)、Carvin Legacy 开放式箱体(搭配 V30 单元)以及 Fender Princeton 1×10(搭配 Jensen 单元)。采样配置灵活,包含单箱体、双箱体及少量三箱体混合版本,助您精准匹配所需声场与频率响应。
  • 技术全面升级:V2 版本基于 IK 最新捕捉技术从头重建,旨在更好地保留音箱的标志性动态触碰灵敏度。所有音色均经过精心调校,以充分发挥原音箱的签名魅力。
  • 无缝兼容性:完美适用于 ToneX 软件​ 及 ToneX Pedal 硬件。为获得最精确的响应,建议将 ToneX 设备或软件的输入增益​ 设置为 0 dB

技术规格

  • 采样数量:45 个 DI 采样,每个均配有 Amp+CAB 版本
  • 箱体模拟:Two Rock 2×12 (G12-65), Carvin Legacy 开背 (V30), Fender Princeton 1×10 (Jensen)
  • 音色范围:清音、临界过载、踏板驱动友好
  • 包含内容:全新 V2 采样集 + 旧版 V1 采样集
  • 平台要求:需搭配 ToneX 软件或 ToneX Pedal 硬件使用

使用建议

  • 适用于录制约翰·梅耶风格蓝调、摇滚、流行乐曲,以及寻求高质量清音平台的专业吉他手。
  • 通过 ToneX Editor 灵活混合匹配不同箱体采样,打造个性化音色。
  • 利用其动态响应特性,充分发挥吉他音量旋钮及演奏力度对音色的影响。
This updated ToneX release is a complete V2 recapture of the Two Rock Traditional Clean, an amp known for its musical compression, responsive “bounce,” and the clear, expressive voice often associated with John Mayer’s live and studio tones. Rebuilt from scratch using IK’s newest capture technology, this pack also includes the original V1 legacy set for anyone who wants to compare or keep using the earlier version.

Inside are 45 DI captures, each paired with Amp+CAB versions using a mix of cabinets depending on the profile: the Two Rock 2×12 with G12-65s, a Carvin Legacy open-back with V30s, and a Fender Princeton 1×10 with a Jensen speaker. Not every capture uses all three cabs – some are single-cab, some dual-cab, and a few include all three – so you can match the feel and frequency response that works best for your setup.

The tones range from sparkling cleans to edge-of-breakup textures, along with drive-friendly captures shaped using boosts inspired by gear commonly found on John’s boards. Everything is voiced to preserve the amp’s signature dynamics and touch sensitivity.

For the most accurate response, we recommend setting your ToneX software or ToneX Pedal input trim to 0 dB.

资源下载
下载价格1 积分
VIP免费
此资源购买后7天内可下载。微信号:audio999555
0
分享海报
需要编曲混音教程、乐谱、工程文件,请联系微信:audio999555
没有账号?注册  忘记密码?