Team R2R | 05 Aug 2026 | 31.0MB
一、产品简介
二、核心硬件模拟架构：混合前级 Hybrid Preamp
- 电子管通路：带来温暖饱和谐波，适合复古、放克、低保真贝斯；
- 固态通路：极致清晰瞬态、扎实低频冲击力，适配现代金属、电子、流行重型贝斯。
三、完整功能模块详解
1. 内置功放压缩 Built-In Compressor
2. 10 段图示均衡 10-Band Graphic EQ
每段 ±15dB 增益调节，精准雕刻贝斯低频厚重感、中频穿透力、高频泛音。
3. Contour 轮廓滤波
- 低通：塑形 100Hz 附近低频基底；
- 高通：修整 10kHz 以上高频毛刺、提升通透度。
4. 前置单块效果（可拖拽自由排序）
- Noise Gate 噪声门：消除贝斯拾音器底噪、线材杂音；
- Envelope Filter 包络滤波：自动哇音、合成器律动贝斯；
- Octaver 八度效果：叠加超低频 / 高频八度，加厚重型贝斯；
- Modern Tubes Drive 现代电子管失真：摇滚 / 金属过载失真。
5. 箱体与录音链路 Cabinet & Recording Chain
- 4 款原厂贝斯箱体模拟、4 支经典拾音麦克风；
- 麦克风距离 / 角度可调、高音单元 Tweeter 独立控制；
- 并行 DI 干声通道，箱体湿声与直插干声自由混合；
- 3 种房间环境混响，模拟不同录音室空间氛围。
6. 双 IR 脉冲加载器 Dual Impulse Loader
7. 后置 6 段参数均衡 6-Band Parametric EQ
8. 后置工作室效果（可拖拽改路由）
9. 箱体旁通 Cabinet Bypass
四、插件兼容格式
五、系统运行要求
- Windows：Win7 及以上 64 位系统
- Mac：macOS 10.13+，兼容 Intel / Apple Silicon
- 最低内存：1GB RAM
“The unmistakable punch, definition, and flexibility of a legendary hybrid bass amplifier”.
Bass 3500 Amplifier, a complete bass amplification and recording suite designed to deliver powerful low end, fast transient response, punch, and tonal flexibility. Bass 3500 is modeled after the legendary Hartke HA3500 bass amplifier, capturing the distinctive character of its hybrid preamplifier design.
Users can independently blend the Tube and Solid State preamp stages, combining harmonic warmth and saturation with the clarity, definition, and immediate response of a solid-state circuit.
Key features
Hybrid Preamp: Independently blend the Tube and Solid State stages to combine warmth, harmonic character, clarity, definition, and punch.
Built-In Compressor: Controls transient peaks, evens out dynamics, and adds weight and consistency to the bass signal. The activity LED provides visual feedback for compression and limiting.
Ten-Band Graphic Equalizer: Provides ±15 dB of adjustment at 30 Hz, 64 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 3 kHz, 5 kHz, and 8 kHz.
Contour Controls: Broad Low Pass and High Pass controls shape the low-frequency region around 100 Hz and the upper-frequency region around 10 kHz.
Pre-Amplifier Stomp Effects: Includes a Noise Gate, Envelope Filter, Octaver, and Modern Tubes Drive. Each pedal can be dragged and reordered to customize the signal chain.
Cabinet and Recording Chain: Includes four bass cabinet emulations, four microphone models, adjustable microphone positioning, tweeter controls, parallel D.I. processing, and three ambience environments.
Dual Impulse Loader: Loads and blends up to two third-party impulse responses, with independent Level, Pan, Phase, Solo, and Mute controls.
Six-Band Parametric Equalizer: Provides detailed post-amplifier tone shaping with multiple filter types and adjustable Frequency, Gain, and Q.
Post-Amplifier Effects: Includes a Studio Compressor, bass-optimized Modulation, and Analog Delay. Each effect can be dragged to change the signal routing.
Cabinet Bypass: Bypasses the complete cabinet, recording chain, and impulse-loader section for use with external cabinet processors, IR loaders, or a real power amplifier and bass speaker system.
System Requirements
Windows 7 or newer, 64-bit DAW
