File size: 64.3 MB
Patina – 黑胶音频插件
Patina 是一款黑胶音频插件，完整重现模拟体验——从备受喜爱的唱片的噼啪声和温暖感，到唱针、沟槽和播放设备的微妙瑕疵，一应俱全。
Patina 重现了黑胶播放的独特特性，从唱针的物理力学机制到模拟电路的温暖质感。
噼啪声（Crackle）
25 种表面噪音纹理，可调节音量、宽度、滤波以及对音频的物理冲击感
黑胶年代感（Vinyl Age）
将多年积累的磨损建模为高频柔化、噪声底升高和轻柔压缩
黑胶弯曲（Vinyl Warp）
因唱片变形产生的缓慢音高摆动——越靠近内圈效果越深
黑胶漂移（Vinyl Drift）
因轴孔偏心导致的每转一次的平滑音高漂移——微妙且持续变化
内圈失真（Inner Groove Distortion）
靠近唱片标签处沟槽速度降低导致的互调失真和高频损失
唱针共振（Stylus Resonance）
唱头的天然共振峰——高频提升，增加明亮度、空气感和存在感
磨损唱针（Worn Stylus）
因数百小时播放而磨损的钻石针尖导致的高频暗淡、颗粒感增加和噪声增大
唱针挤压（Stylus Pinch）
大动态低音下唱针在沟槽壁间位移产生的倍频失真
RIAA 特性（RIAA Character）
黑胶模拟信号链的音色渲染——增加温暖感、轻柔饱和和柔和低音
RIAA 失配（RIAA Mismatch）
在温暖饱满与明亮有力、中频突出之间切换播放 EQ 校正曲线
黑胶压缩（Vinyl Compression）
机械沟槽压缩——低能量调制高频，产生微妙的抽吸感和高频下压
幽灵回声（Ghost Echo）
相邻沟槽串音——响亮的印记在周围邻近沟槽中留下淡淡的幽灵痕迹
转盘隆隆声（Turntable Rumble）
电机和转盘轴承的低频振动——一种更多是感受到而非听到的超低音存在感
立体声声场（Stereo Field）
立体声宽度控制，从紧凑的单声道兼容窄声场到宽广、开阔的立体声增强
母带工坊（Mastering House）
四种截然不同的母带链特性——每种都有自己的转盘、磁带机和声音指纹
系统要求
- Windows 10 及以上
- VST3 / AU 格式
- 支持 Live、Cubase、Nuendo、Logic、Studio One、Reaper
- 44.1 kHz，最高支持 192 kHz
Patina is a vinyl audio plugin that recreates the full analog experience — from the crackle and warmth of a well-loved record to the subtle imperfections of the stylus, the groove, and the machine that plays it all back.
Patina recreates the distinct characteristics of vinyl playback, from the physical mechanics of the stylus to the warmth of analog circuitry.
Crackle
25 surface noise textures with shaping controls for volume, width, filtering, and physical impact on the audio
Vinyl Age
Years of accumulated wear modeled as high-frequency softening, an increased noise floor, and gentle compression
Vinyl Warp
Slow pitch wobble from a warped disc — the effect deepens gradually as it approaches the inner grooves
Vinyl Drift
Smooth once-per-revolution pitch drift caused by an off-center spindle hole — subtle and always moving
Inner Groove Distortion
Intermodulation distortion and high-frequency loss from the reduced groove velocity near the record label
Stylus Resonance
The cartridge’s natural resonant peak — a high-frequency lift that adds brightness, air, and presence
Worn Stylus
Dulled highs, added grit, and increased noise from a diamond tip worn down by hundreds of hours of play
Stylus Pinch
Frequency-doubling distortion from the stylus shifting against the groove walls under heavy bass content
RIAA Character
Tonal coloration from vinyl’s analog signal chain — adding warmth, gentle saturation, and cushioned bass
RIAA Mismatch
Shifts the playback EQ correction curve between warm, lush and full or bright, punchy and mid-forward
Vinyl Compression
Mechanical groove compression — bass energy modulates the treble, creating subtle pumping and HF ducking
Ghost Echo
Adjacent groove bleed — loud passages imprint faint ghostly traces into the neighboring grooves around them
Turntable Rumble
Low-frequency vibration from the motor and platter bearings — a sub-bass presence felt more than heard
Stereo Field
Stereo width control ranging from tight mono-compatible narrowing to wide, spacious stereo enhancement
Mastering House
Four distinct mastering chain characters — each with its own lathes, tape machines, and sonic fingerprint
System Requirements
Windows 10+
VST3 / AU
Live, Cubase, Nuendo, Logic, Studio One, Reaper
44.1 kHz, Maximum: 192 kHz
