File size: 6.2 MB
专为打造响亮、纯净的主音（master）和厚重、浑浊的低音而设计。使用它，能让你的音频比当前使用的削波器（clipper）再提升1dB响度。
标准硬削波器为何听起来效果不佳
标准的硬削波器VST插件具有固定的数字上限。
这存在两个致命缺陷：
- 在削波事件发生时，会使瞬态（transients）坍缩为单声道。
- 会添加持续存在的、与音乐不相关的谐波——数字折叠混叠失真（digital foldback aliasing）。
这种组合会让你的混音变得单薄、刺耳，充满金属质感般的糟糕。
全新方法
BuzzCut是全球首款侵蚀式削波器插件。它用经过塑形的噪声来调制削波阈值。
这创造出了独特的瞬态响应，能够：
- 保留3D立体声深度。
- 在削波事件发生时，用“模拟噪声”掩盖非谐波折叠混叠失真——类似于用抖动（dithering）掩盖截断失真的方式。
现在，你可以自由选择：模拟氛围感。
BuzzCut特点：创意音效设计的利器
一款母带处理削波器所需的一切功能都集于一身
非对称失真，产生偶次谐波
正负削波阈值不关联。可对每个极性独立应用不同的波形整形曲线和侵蚀处理。这能产生偶次谐波——这是模拟电子管所特有的温暖感，是任何对称削波器都无法比拟的。
与数字音频工作站（DAW）同步的双通道示波器
无需猜测：实时精确查看你对左右声道波形所做的处理。可分离示波器进行监测，并根据你的喜好自定义显示。没有其他削波器能提供与数字音频工作站同步的、同时显示双通道的实时视觉反馈。
多阶段RMS和响度单位（LUFS）自动增益匹配
一键LUFS校准，实现即时电平匹配。试听音效，而非音量突变。三个独立的RMS自动增益补偿阶段（软削波、硬削波、混合）确保即使将信号驱动至-3 LUFS甚至更低时，信号依然能得到良好控制。
主页
https://lusidmusicuk.com/products/buzzcut-the-erosion-clipper
Designed for LOUD, CLEAN masters & FAT, DIRTY basses. Get 1dB louder than your current clipper.
Why Standard Hard Clippers Sound Bad
Standard hard clipper VST plugins have a fixed digital ceiling.
This has two fatal flaws
* It collapses your transients to mono during clipping events.
* It adds sustained musically orphaned harmonics – digital foldback aliasing.
This combination turns your mix into a thin, harsh metallic mess.
A New Approach
BuzzCut is the world’s first erosion clipper plugin. It modulates the clipping threshold with shaped noise.
This creates a unique transient response that
* Retains 3D stereo depth.
* Masks inharmonic foldback aliasing with “analog noise” when clipping events occur – similar to how dithering masks truncation distortion.
Now you have the freedom to choose: analog air.
BuzzCut Features: A Creative Sound Design Monster
Everything you need in a mastering clipper
Asymmetric Distortion for Even-Order Harmonics
Unlinked positive and negative clipping thresholds. Apply different wave-shaping curves and erosion to each polarity independently. This generates even-order harmonics – the warmth of analog tubes that no symmetrical clipper can touch.
DAW-Synced Dual-Channel Oscilloscope
Stop guessing: see exactly what you’re doing to the waveform on the LEFT and RIGHT channels simultaneously in real-time. Detach the oscilloscope for monitoring and customize the display to your preference. No other clipper gives you simultaneous dual-channel visual feedback with DAW sync.
Multi-Stage RMS & LUFS Auto-Gain Matching
Instant level matching with one-click LUFS calibration. Audition the sound, not the volume jump. Three separate stages of RMS auto-gain compensation (soft clip, hard clip, mix) ensure your signal stays controlled even when driving it to -3 LUFS and beyond
