File size: 24.63 MB
由Paul Frindle开发，一些最受尊敬和喜爱的产品在录音历史上的开发者，包括SSL E / G系列控制台，以及强大的索尼牛津OXF-3数字板。
动态频谱映射器（DSM）插件旨在提供多维控制，频谱响应和动态特性的音频。
使用新颖的处理和程序捕获算法提供了在程序压缩和增强、声乐表达和乐器表征等常见任务中快速实现示例性结果的能力。
捕捉，修改和重新应用你的轨道的频谱特征的能力是一个强大的创意工具在生产周期的各个阶段，从记录和混音到掌握阶段。
DSM V3有许多用例，从在母版中匹配音轨到在混音中调整困难的音轨。它甚至可以作为一个惊人的De-Esser！
DSM V3当然是掌握的武器！
→特点:
•捕捉签名的声音从一个轨道，并动态打动它在不同的轨道。与传统的均衡器匹配方法相比，DSM V3的动态频谱映射提供了更可信的结果。
•通过捕获文件的完美部分并将其应用于整个轨道来平衡单个轨道。
•DSM V3不仅提供压缩，而且还扩展您的音频材料。
•改进了工作流程，增加了调节频率曲线的直观控制。
•比传统的多频带压缩器多3倍以上的频带，在中高段具有特别好的分辨率，在那里形成了最大的个性和人声音色。
•专有捕获系统使用光谱和动态信息来获得阈值曲线。因此，程序压缩，扩展和减少是参照一个可信的，真实的频率响应进行的。
•超光滑，弹性压缩和膨胀。大的动态事件和频谱复杂的冲击很容易压缩。即使在严重压缩下，也避免了字符外的音调变化。
•瞬态保持完整，从不平滑。这一点的重要性不能被夸大，这是许多“频谱”音频处理器最终破坏你的混音。DSM V3总是保持打孔和细节完好无损。
•控制限制器是100%透明低于-1dBFS。这意味着限制器只处理峰值，其余部分不动。再次，所有瞬态细节被保留，甚至高于数字最大值。
•平行压缩很容易实现与干/湿混合控制。
•允许导入DSM V2捕获曲线
•作为一个全新的插件开发，基于与V2相同的处理
→新增DSM V3：
•全新的扩展模式。
•全主动频谱侧链输入与源选择。
•在频谱图上的活动拖动手柄。
限位器和DSM动态处理现在可以独立使用。
•改进的信号流，更方便。
•更方便的设置和曲线存储和恢复管理。
•可扩展的GUI从50%到150%。
支持的操作系统
•macOS 12.0或更高版本
•苹果硅或英特尔酷睿处理器
Developed by Paul Frindle, the developer of some of the most respected and beloved products in the recording history, including the SSL E / G series consoles, and the mighty SONY OXFORD OXF-3 digital boards.
The Dynamic Spectrum Mapper (DSM) plugin is intended to provide multi-dimensional control over both, the spectral response and dynamic characteristics of your audio.
The use of novel processing and program capture algorithms provides the ability to achieve exemplary results in common tasks such as program compression and enhancement, vocal expression and instrument characterization very quickly.
The ability to capture, modify and re-apply the spectral characteristics of your track is a powerful creative tool in all stages of the production cycle, from recording and mixing to mastering stages.
DSM V3 has many use cases, from matching tracks in mastering to evening out difficult audio tracks in a mix. It even serves as an amazing De-Esser!
DSM V3 certainly is a weapon in Mastering!
→ FEATURES:
• Capture the signature sound from one track, and dynamically impress it upon a different track. The Dynamic Spectrum Mapping of the DSM V3 lends a more believable result than the conventional EQ matching method.
• Balance out individual tracks by capturing a perfect section of the file and applying it to the whole track.
• DSM V3 is not only offering compression but also expansion of your audio material.
• Improved workflow adding intuitive control for adjusting frequency curves.
• More than 3 times as many frequency bands as conventional multiband compressors, with particularly fine resolution in the mids and highs, where the lion’s share of character and vocal timbre are formed.
• Proprietary Capture System uses both spectral and dynamic information to obtain a Threshold Curve. Thus, program compression, expansion and de-essing is performed with reference to a credible, authentic frequency response.
• Super-smooth, resilient compression and expansion. Large dynamic events and spectrally complex percussion are compressed with ease. Out-of-character tonal changes are avoided, even under heavy compression.
• Transients are kept intact, never smoothed-over. The importance of this cannot be overstated, and is where many “spectral” audio processors end up ruining your mixes. The DSM V3 always keeps the punch and detail intact.
• Mastering Limiter is 100% transparent below -1dBFS.This means the Limiter only processes the peaks, leaving everything else untouched. Again, all transient detail is preserved, even above digital maximum.
• Parallel Compression is easily achieved with the Dry/Wet mix control.
• Allows import of DSM V2 capture curves
• Developed as a completely new plugin, basing on the same processing as V2
→ New in DSM V3:
• All new Expand mode.
• Fully active spectrum sidechain input with source selection.
• Active Drag handles on Spectrum graph.
• Limiter and DSM dynamic processing can now be used independently.
• Improved signal flow for greater convenience.
• More convenient setup and curve store and restore management.
• Scalable GUI from 50% to 150%.
Supported Operation System
• macOS 12.0 or later
• Apple Silicon or Intel Core processor
