GUISEPPE | 20 July 2026 | 13 MB
精准量化增益分级，零误差响度匹配 A/B 对比
产品定位
一、STAGE 自动增益分级模块
核心原理
支持测量标准：峰值 Peak / RMS / VU / LUFS 响度。
六大核心功能
- 持续实时响度监测
无需手动触发录制，插件持续分析音频，自动抓取有效响度区间，规避单次爆音干扰测量结果。
- 多标准自定义目标电平
可自由设定 Peak/RMS/VU/LUFS 目标值，内置模拟设备、流媒体、高动态、俱乐部场景快捷预设。
- 音源专属预设
人声、鼓组、贝斯、母带预设，一键匹配对应行业标准电平，插件可自动识别轨道音源类型推荐参数。
- 超采样真实峰值安全检测
增益校准后启用 4 倍超采样，检测采样间峰值 dBTP，实时显示结果，绿色标识代表编码后无削波风险。
- 无爆音零延迟调节
增益变化采用 10ms 平滑淡入处理，调节切换无咔嗒爆音，不增加链路延迟。
- 全工程一键批量校准
工程内所有 STAGE 插件互相联动，任意主实例点击「SET ALL」，全部轨道同步校准至目标电平，一键完成全曲增益分级。
二、EVEN 响度匹配 A/B 对比模块
核心原理
核心功能
- 全自动响度均衡
统一两条对比通道感知响度，杜绝削波失真，保证对比公平客观。
- 盲听打分模式
随机打乱 A/B 标识，手动投票偏好音色，结束后统计对比结果，消除主观预判偏见。
- 灵活对比链路
单轨道内部分流对比；支持按轨道名称联动配对，最多同时同步 64 条轨道，自动对齐链路延迟。
底层特性
- 仅做固定增益偏移，无任何音色染色、动态压缩、信号延迟，混音状态稳定可复现；
- 内置差值监听 Solo，单独收听插件带来的电平变化量，精准把控处理幅度。
版本更新说明
规格参数
- 插件格式
macOS：AU / VST3 / AAX；Windows：VST3
- 系统需求
macOS 10.13 及以上，原生兼容 Intel、Apple Silicon M 系列芯片
Windows 10 / Windows 11
- 授权政策
一次性买断 39 美元，单授权激活两台设备，无订阅费用；当前版本 v2.0.5，已正式发售。
- 试用方案
全功能 5 天免费试用，无需信用卡、注册账号，可直接加载工程实测。
官方主页
STAGE
Gain-staging that measures. A/B that never lies.
Two tools in one plug-in. STAGE sets your level with a single, click-free trim to the target you choose, then links across every channel so one instance can stage the whole mix at once. EVEN lets you compare two chains at exactly matched loudness, even blind, so tone calls are never fooled by volume.
Two tools, one plug-in
Set the level right. Then hear the truth.
STAGE gets your levels honest before you process. EVEN keeps you honest while you do.
STAGE
Automatic gain-staging
STAGE listens to your loudest pass and measures it, the 95th-percentile level, not one stray transient. Then it suggests a single static trim to land that pass on your target. No riding, no pumping, no colour. Peak, RMS, VU or LUFS.
EVEN
Loudness-matched A/B
Louder always sounds better, so a fair A/B has to be level-matched. EVEN gains the two paths to equal perceived loudness, switch blind and vote, then reveal the tally. Judge the sound, never the volume.
Inside STAGE
One measured trim. Nothing else.
A single fixed gain change adds zero colour, zero pumping, zero latency. It is the most transparent thing you can do to a signal, and because it never moves, your mix stays predictable.
01
Measures the loud pass
Always listening, no arm button. A running 95th-percentile level: loud enough to matter, robust against a one-off transient.
02
Your target, your metric
Land the pass on a target in Peak, RMS, VU or LUFS. Quick pills for the analog, streaming, hot and club levels.
03
SOURCE presets
Vocal, Drum, Bass or Master set the target and metric as a pair, and STAGE even guesses the source for you.
04
True-peak safe
After it sets the trim, STAGE runs a 4× oversampled inter-sample check and tells you the post-trim dBTP, green when it survives the codec.
05
Click-free, instant
The trim applies over a 10 ms ramp, so there is never a click, and it adds no latency to your chain.
06
One click stages the whole mix
Every STAGE is a satellite. They link to each other across the session, so one main instance can trigger them all. Hit SET ALL once and every channel lands on its target: a full mix gain-staged in a single click.
Whats new in this version
Official site does not provide any info about changes in this version.
System Requirements
macOS 10.13 or newer
Apple Silicon / Intel
